# How do I find my UTM zone?

## How do I find my UTM zone?

Calculating the Boundaries of a UTM Zone Calculate the eastern boundary of any UTM zone by multiplying the zone number by 6 and subtracting 180. Subtract 6 degrees to obtain the western boundary. Therefore to find the eastern boundary of UTM zone 11: Eastern boundary of zone 11 = (11 * 6) – 180 = -114 degrees.

What UTM zone is Tanzania?

UTM zone 37S
WGS 84 / UTM zone 37S Tanzania.

### What UTM zone is South Africa?

33S
The Universal Transverse Mercator zones. For South Africa UTM zones 33S, 34S, 35S, and 36S are used. As you can see in figure_utm_zones and figure_utm_for_sa, South Africa is covered by four UTM zones to minimize distortion. The zones are called UTM 33S, UTM 34S, UTM 35S and UTM 36S.

What is the UTM zone of a map?

UTM is the acronym for Universal Transverse Mercator, a plane coordinate grid system named for the map projection on which it is based (Transverse Mercator). The UTM system consists of 60 zones, each 6-degrees of longitude in width. One system is no more or less accurate than the other.

#### What is arc1960?

Arc 1960 is a geodetic datum first defined in 1960 and is suitable for use in Kenya; Tanzania; Uganda.. Arc 1960 references the Clarke 1880 (RGS) ellipsoid and the Greenwich prime meridian. Arc 1960 is a geodetic datum for Topographic mapping, geodetic survey.

What does CRS mean in QGIS?

coordinate reference system
When working with spatial data, it is important that a coordinate reference system (CRS) be assigned to the data and QGIS project. To view the CRS for the QGIS Project, click Project | Project Properties and choose the CRS tab.

## What is UTM and WGS84?

WGS84 allows you to have a datum in the full meaning of the term, and this is projected using the map projection. UTM is a map projection system: Universal Transverse Mercator. WGS is a datum and ellipsoid that model the Earth. In GIS, specifying WGS84 as the datum means you can use GPS data directly.

Is UTM the same as MGRS?

The Military Grid Reference System (MGRS) is an extension of the UTM system. UTM zone number and zone character are used to identify an area 6 degrees in east-west extent and 8 degrees in north-south extent. UTM zone number and designator are followed by 100 km square easting and northing identifiers.

### Is UTM equal area?

TM and UTM projection coordinates were also calculated, except for equal-area projections. The list of the projections and the starting coordinates used in the application are given in Table 1.

How do I Find my UTM zone?

The second number in UTM coordinates in called the northing.

• The northing refers to how far north you are.
• If you are using a map,look at the numbers found along the edge of the map that correspond with the UTM coordinates.
• If you are using a GPS,the northing will be the second number when it is set in UTM mode.
• #### What UTM zone Am I in?

UTM zones are numbered from 1 to 60 starting from 180° longitude at the International Date Line and proceeding eastward. Each zone is 6° longitude wide. Therefore Zone 1 lies between 180°W to 174°W longitude lines, Zone 2 is between 174°W and 168°W longitude lines, and Zone 60 lies between 174°E and 180° (International Date Line) longitude lines.

What time zone is East Africa in?

East Africa Time, or EAT, is a time zone used in eastern Africa. The time zone is three hours ahead of UTC (UTC+03:00), which is the same as Moscow Time, Arabia Standard Time, Further-eastern European Time and Eastern European Summer Time.

Posted in Interesting