How do I fix error 0xc0000225?

Follow the below steps to hopefully fix the issue, no matter the cause.

Step 0: Create a Windows 10 Install Disk.
Step 1: Run Through Windows Automatic Repair.
Step 2: Run Manual SFC and Check Disk Scans.
Step 3: Rebuild the BCD.
Step 4: Set Your Active Partition.
Step 5: Check for Faulty Hardware.

What causes 0xc0000225?

First off, error code: 0xc0000225 means Windows cannot find the System Files used for booting, aka, BCD (Boot Configuration Data). In other words, if your system files are corrupted, the disk file system has a bad configuration, or if you have faulty hardware, the 0xc0000225 error would occur.

What causes Windows unable to boot?

The most likely cause of the Windows failed to start error is the missing or corrupted BCD file. The reasons for BCD file missing or corruption are various. There could be disk write errors or power outages and so on. If the BCD file is missing, your computer will show the error “Windows failed to start.

How to get rid of error 0xc0000225 in Windows 10?

Reboot from the Windows 10 install media disk.

Go to Advanced Options -> System Restore.

Select one of the most recent restoration times for Windows to restore to. This will not interfere with any personal files you may have.

Then,reboot to see if the 0xc0000225 BSoD error is still present.

What is that 0xc0000022 error?

files that are corrupted or have accessibility issues

interference with security software

missing DLL file

How to solve Windows Error code 0xc000000e in Windows 10?

Method 1. Set BIOS default settings. BIOS is the program to get computer system started after you power on the computer.

Method 2. CHKDSK utility. CHKDSK utility is a program to scan through the whole hard drive and automately fix any error found.

Method 3. Rebuild MBR. MBR is a vital structure to boot Windows.

What is error 0x8500201d on Windows 10?

The message about the 0x8500201d error precisely states that the mail app is experiencing a problem with synchronizing your mail account. However, in this case, your issue might also be an account-configuration one or a plain sync problem.