Menu Close

How do I fix the GREY screen of death on my Mac?

How do I fix the GREY screen of death on my Mac?

  1. Disconnect All External Peripheral Devices.
  2. Use Disk Utility to Repair the Storage Drive.
  3. Start Up Mac by Using Safe Boot Mode.
  4. Reset NVRAM and PRAM to Fix the Issue.
  5. Use Recovery Drive to Salvage Mac Data.
  6. Reinstall macOS.

How do I fix a stuck GREY screen on my MacBook pro?

Press and hold the power button for about 10 seconds. Press and release the power button, then immediately press and hold Command (⌘)-R until you see an Apple logo or other image. If you still see a blank screen after about 20 seconds, contact Apple Support.

Why won’t my MacBook air go past the login screen?

Solution 3: Reboot your Mac into Safe Mode To boot into Safe Mode, you have to: Press and hold the Shift key while pressing the power button to restart your Mac. Release the Shift key when you see the Apple logo and loading bar. Uncheck login items in Users & Groups after your Mac loads successfully in Safe Mode.

Why is my Mac background Gray?

This happens randomly after the systems have been woken from sleep, and when it occurs, the background will not change even if you manually try to reset it. It appears that this occurrence is a problem with the management of multiple monitors and desktops, which in OS X is the responsibility of the Dock.

How do you fix a GREY screen on a MacBook Air?

(If it’s not responsive because it’s stuck on a gray, blue, or white screen, just hold down the Mac’s power button for several long seconds until it gives up and shuts off.) Hold down the Command and R keys, and power the Mac back up again. Eventually, you’ll end up on a screen headlined OS X Utilities.

Why is my Mac stuck on password screen?

Mac could be stuck on the login screen after you forget Mac’s password. If you’ve entered the wrong password too many times, the system could be locked. Then the Mac won’t accept the password even it’s the right one. In this case, you should reset your password first.

What do you do if your computer screen goes GREY?

how to fix grey screen display on laptop windows 10

  1. Go to Troubleshoot > Advanced Option > Startup Repair.
  2. Also try to go to Troubleshoot > Advanced Option > System Restore.
  3. If you do not have a restore point, you can go to Troubleshoot > Advanced Option > Startup Settings > Restart.

Why is my computer stuck on a GREY screen?

Force a Shutdown and Remove Peripheral Hardware If your system presents the gray screen, there is nothing you can do except force a shutdown. You have to press and hold the power button to make sure it’s really off. Once done, try rebooting your system.

Why has my laptop screen gone GREY?

When a monitor turns grey, it might indicate an incorrectly connected display cable or a faulty graphics card. Several interactions from the computer to the monitor take place to display a single image—and any one of these interactions could be faulty.

How to fix grey screen on MacBook Air?

[Solution] How to Fix Grey Screen on Mac 1 Remove All External Peripherals. 2 Repair Disk using Disk Utility. 3 Start Mac Using Safe Boot. 4 Reset PRAM. 5 Repair a Startup Drive. 6 Reinstall Mac OS X. See More….

What is gray screen startup problem on Mac?

Part 1: What Is Gray Screen Startup Problem on Mac? When your Macbook pro gets stuck on grey screen, it actually becomes so dark and rather looks black. Due to Retina display on Mac, there is no power indicator on a Mac screen. When the system starts, your screen goes grey resulting in grey screen problem.

How to fix the Mac stuck on login screen?

Anyhow, no matter what situation you’ve run into, these methods would help you fix the Mac (like MacBook Pro) stuck on login screen issue. Solution 1: Bypass Login items at startup. In some cases, it’s software that stops you from getting to your Mac. Then, you can try these steps to sign in your iMac or MacBook. 1. Start your MacBook normally. 2.

Why won’t my MacBook Air Load past login screen?

1 Mac won’t load past login screen after entering password It happens to users who encrypt the system drive. You’ll be asked for a password before you see the progress bar. Then, the loading bar may stop somewhere between 50% and 75%, or even 100%.

Posted in Blog