Menu Close

How do you calibrate a B6 charger?

How do you calibrate a B6 charger?

Calibration process:

  1. hold Dec (-) and Start button.
  2. plug power adaptor.
  3. wait for calibrating menu.
  4. release Dec (-) and Start button.
  5. wait 20 minutes to warm up to the working temperature.
  6. plug in battery and measure it, compare values between charger and Voltmeter.
  7. if necesarry, then make correction using + and –

How do you use the b6ac charger?

iMAX B6 Chargers

  1. Plug in the mains adapter and plug it into the battery charger.
  2. Connect the charging lead from the charger to the battery.
  3. Connect the monitoring lead from the battery to the charger.
  4. Place the battery in the charging bag.
  5. Configure the charger using the menu system as follows.

What is a battery balance charger?

The balance charger monitors the voltages of individual cells in the pack via a connector present on the pack. It then adjusts the rate of charge accordingly. This process is referred to as balance charging. This voltage depends on the number of cells in the pack, which is then multiplied by 4.2V.

How does battery balancer work?

The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. The resulting charge current differential will ensure that all batteries will converge to the same state of charge. If needed, several balancers can be paralleled.

How do I know when my LiPo battery is fully charged?

LiPo batteries are fully charged when they reach 4.2v/cell, and their minimum safe charge, as we will discuss in detail later, is 3.0v/cell. 3.7v is pretty much in the middle, and that is the nominal charge of the cell.

How does b6ac work?

During the process of discharging, B6AC can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal. Adaptable to various type of lithium battery

What is b6ac Lipo balance Charger by IMAX?

INTRODUCTION INTRODUCTION Thank you for purchasing the B6AC LiPo Balance Charger by iMAX.This product is a rapid charger with a high performance microprocessor and specialized operating software.

What kind of lithium batteries does b6ac support?

Adaptable to various type of lithium battery B6AC is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries. Fast and storage mode of lithium battery

How do I calibrate my 6S battery charger?

2. power on the charger and only connect the balance lead of the 6s battery to the balance socket. 3. press ‘Stop’ to return to the main menu and navigate down to ‘BATT METER’. 4. press and hold ‘Enter’ for a while until the voltage unit switch to mV, which indicates the charger can be calibrated.

Posted in Advice