How do you save design rules in Altium?
Design rules can be exported from and imported to the PCB Rules and Constraints Editor dialog. This allows you to save and load favorite rule definitions between different designs. To export – right-click anywhere within the tree on the left of the dialog and select Export Rules.
What is net class in Altium?
A Net Class is a logical collection of Nets that can be used as the basis for creating a targeted design rule.
How do you check the DRC in Altium schematics?
Accessing options applicable to running a Batch DRC, and generating a DRC report. A batch-mode DRC is initiated by clicking the Run Design Rule Check button, at the bottom-left of the dialog. After the check has completed, all violations are listed as messages in the Messages panel.
How do I change the design rule in Altium?
To add a new design rule from within the PCB Rules and Constraints Editor dialog, simply navigate to, and select the required rule type, within the left-hand tree, and either: click the New Rule button, below the rule summary list, or. right-click and select New Rule from the context menu.
How do I change the priority of a rule in Altium?
The dialog is accessed from the PCB Editor by clicking the Priorities button at the bottom of the PCB Rules and Constraints Editor dialog (click Design » Rules) .
How do I create a net class in Altium schematics?
A Net Class directive enables you to create user-defined net classes on the schematic. A Net Class directive can be placed by choosing the Place » Directives » Parameter Set command from the main menus then defining the parameter set as a net class directive as specified in Tip #2 on the command page.
What is room in Altium?
A room is a primitive design object. It is a region that assists in the placement of components. Alternatively, orthogonal, non-orthogonal, and rectangular shaped rooms may be created automatically based on selected components in the workspace.
How do I create a netlist in Altium design?
- Edit – click to access the Pad dialog in which you can view and modify the properties of the currently selected pin (pad).
- Menu – click to access a menu offering the following commands: Add Net – use to add a new net for the board. The Edit Net dialog opens in which you can define the properties of the net.
What is Design Rule Check in VLSI?
Design Rule Checking (DRC) verifies as to whether a specific design meets the constraints imposed by the process technology to be used for its manufacturing. DRC checking is an essential part of the physical design flow and ensures the design meets manufacturing requirements and will not result in a chip failure.
How do I create a Gerber file in Altium?
Generating Gerber file
- Open your .PCB design files on Altium designer software. Select File -> Fabrication Outputs -> Gerber Files.
- General Setting. In the General Setting set the precision to 2:5 (0.01 mill resolution)
- Layers Setting.
- Aperture Setting.
- Advanced Setting.
How to add the eurocircuits rules in Altium Designer?
Put a copy of the PcbDoc in your Altium Designer project folder (*.PcbPrj). Put a copy of the script (6C or 8D) in your project folder. From this moment the EuroCircuits rules for Pattern Class, Drill Class and layer-stack is available in the design.
What are the rules of eurocircuits?
From this moment the EuroCircuits rules for Pattern Class, Drill Class and layer-stack is available in the design. The minimum annular ring rule “Minimum-IAR” is set to the IAR value of the Pattern class. This value is larger than the OAR. When “Top-Middle-Bottom” or “Full stack” is used it is possible to change the OAR to the (smaller)
What are Altium Designer templates (pcbdoc)?
Altium Designer templates with Eurocircuits design rules. Altium Templates (PcbDoc) help to check your layout against the Eurocircuits technology classification (6C and 8D). This way you can easily define which Eurocircuits service is most suited for you board, and avoid documentation problems after you place your order. There are 8 PcbDoc’s :
How to specify the routing width of a circuit board?
For example, to specify the most commonly used routing width on the board, define a single rule that applies to every net on the board. This rule can then be overridden for a specific net (or a class of nets for that matter) by adding another rule of the same type, but with a higher priority. Another example could be the solder mask requirements.