How does me export bus work?
The ME export bus (added by Applied Energistics) is the opposite of the ME import bus, and allows you to take items from the ME network and put them into external sources such as chests and furnaces. Attach the export bus to any block containing items and feed it into the network via ME cable.
How do I export items from me interface?
As An Import/Export Bus Like the ME Export Bus, place up to 8 items in the left hand, “Export Config”, inventory area. The ME Interface will then fill the “Exported Items” with that number of items from the network (e.g. placing 7 iron ingots in the config will place 7 iron ingots in the export inventory).
How do you use me fluid export bus?
The ME Fluid Export Bus is an item added by Extra Cells. It will attempt to push the configured fluid into the attached fluid, such as a Portable Tank. To configure a fluid, put a bucket of the fluid in the square slot. The rate of export can be set with different levels of power consumption.
How does me import bus work?
Attach the import bus to any block containing items and feed it into the network via ME cable. By default, it will pull all items in that unit back into the ME network. This does not affect items that were put into units such as furnaces.
How do you use me level emitter?
The ME Level Emitter can indicate either the level of a specified item or the ME Network energy level. You can set the threshold and if the ME Level Emitter will emit a redstone signal or turn it off. Requires a channel to function, if its power or channel is lost the emitter will switch to an off state.
How do you use dense cable?
One Controller is capable of connecting up to 6 Dense Cables, in turn each can branch off to 4 smaller cable lines connecting up to 192 ME devices to the network. The Dense Cable also displays the amount of channels that are been used….
|ME Dense Cable – Fluix|
What does an ME interface do?
The ME Interface is a block added by Applied Energistics 2 and Applied Energistics mods. It allows the ME Network to interact with machines, transport pipes and tubes. A player can configure certain items to be exported from the ME Network and it will import the output from machines and transport systems.
Does a level emitter use a channel?
It requires a channel to function; if its power or channel is lost the Emitter will switch to an off state.
How do you use a crafting card?
The Crafting Card is an item added by the Applied Energistics 2 mod. The card allows ME Network devices to draw on the ME Auto Crafting system when items run out of stock by placing automatic job orders. This Card should be used with care to avoid depleting resources….
What is the difference between the import and export bus?
If you want the bus to import everything (which is often the case), just leave the menu of the import bus (by right-clicking it) clear of any items. The export bus is used to automatically process things in the system.
How do I hook up an exportexport bus?
Export buses need to be hooked up to a machine or storage if you want items to be carried out of the ME system and into such a device (such as a macerator, generator or furnace). If, for instance, you want to feed coal to a furnace from the ME system, hook up an export bus to the bottom slot of the furnace.
How do I use the import bus?
The import bus is to import things into the ME system. It can be connfigured to import everything in the inventory or only certain things. Correct. If you want the bus to import everything (which is often the case), just leave the menu of the import bus (by right-clicking it) clear of any items.
How do I use the export bus with a Macerator?
The same principle applies to a macerator, exept for the fact that the export bus needs to be placed on the top slot of that macerator to feed the macerator items that need to be macerated. Remember to right-click the export bus to specify which items you want to export from the system into the device (or storage unit).