Menu Close

How much does it cost to put in an underground sprinkler system?

How much does it cost to put in an underground sprinkler system?

An underground sprinkler system costs anywhere from $1,740 to $3,400 to install on a one-quarter acre residential lawn. Larger lawn areas and yards with multiple zones will cost more to irrigate. This project requires you to pay the cost to dig a trench, purchase materials and complete the installation.

How much does a large irrigation system cost?

Sprinkler System Costs

Sprinkler System Installation Cost
National average cost $5,500
Average range $4,000-$7,000
Minimum cost $2,200
Maximum cost $13,500

Are in ground sprinklers worth it?

An often overlooked benefit to irrigation systems is potential monthly utility savings with reduced water usage. A properly automated and timed irrigation system, coupled with well-matched sprinkler heads and hoses by plant zones, can be a great way to help homeowners reduce overall water usage and utility costs.

How much is a sprinkler head?

Sprinkler Head Prices

Head Type Part Cost Replacement Cost
Pop-Up 2” $3–$4 $8–$11
Pop-Up 4”–6” $2–$5 $8–$11
Pop-Up 8”–12” $10–$12 $19–$21
Fixed $7–$11 $12–$16

How deep should you bury a sprinkler system?

Dig for Your Sprinkler System The trenches will be relatively shallow, usually 6 to 12 inches deep, depending on your area’s freeze cycles and frost severity. The trench must also be deep enough to allow the sprinklers to retract underground to prevent breakage from lawn machines.

What are 4 types of irrigation techniques?

Types of Irrigation Systems

  • Surface irrigation. Water is distributed over and across land by gravity, no mechanical pump involved.
  • Localized irrigation.
  • Drip irrigation.
  • Sprinkler irrigation.
  • Center pivot irrigation.
  • Lateral move irrigation.
  • Sub-irrigation.
  • Manual irrigation.

How deep are sprinkler pipes?

Are underground sprinklers worth it?

The system is susceptible to underground leaks and can be damaged by lawn mowers hitting the sprinkler heads. And it requires ongoing maintenance, such as blowing out the water in the lines in the fall to prevent the pipes from freezing and cracking in the winter. But for some people, a sprinkler system is worth it.

How much does it cost to install a drip irrigation system?

Drip irrigation system installation costs $300 to $1,200 per zone or $500 to $3,000 per acre for above ground drip lines. Subsurface irrigation costs $1,000 to $4,000 per acre and is common on farms. Installing drip irrigation to an existing sprinkler system costs $300 to $1,200 per zone.

What are disadvantages of irrigation?

1. Excessive seepage and leakage of water forms marshes and ponds all along the channels. Excessive seepage into the ground raises the water-table and this in turn completely saturates the crop root-zone. It causes waterlogging of that area.

How much does an inground sprinkler system cost?

On average, a professionally installed in-ground sprinkler lawn irrigation system costs between $1,800 to $3,500. For larger and more complex landscapes, the cost can exceed $5,000. Cost factors include the shape of the lawn, how difficult it is to trench the ground for installation and the number and type of sprinkler heads used.

How much does it cost to install an irrigation system?

Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.

  • Specify Project Size and Options Enter the number of “square feet” required for the project.
  • Re-calculate Click the “Update” button.
  • Is an irrigation system worth it?

    QUEZON CITY — The Department of Agrarian Reform (DAR) in Batangas, together with the inspectorate team from the DAR central and regional offices conducted the final inspection of the Solar-Powered Irrigation System (SPIS) worth P1 million in Brgy.

    How to drain an inground sprinkler system?

    Turn off your water supply valve for the sprinkler system at the Main Shut Off Valve A.

  • Open all inlet and outlet drain valves on the backflow preventer.
  • Turn inlet and outlet ball valve handles to a 45 degree angel position.
  • Open drain valve near water supply valve to drain water back from backflow preventer.
  • Posted in General