Menu Close

How strong is the 6R80 transmission?

How strong is the 6R80 transmission?

The 6R80 has already been field-proven to accept up to 1000HP in stock form, with only ECU tuning. With aftermarket components, the 6R80 will likely handle much more power. Stock applications already employ a multi-plate torque converter clutch, enabling greater power handling in lockup.

Is the Ford 6R80 a good transmission?

The Ford 6R80 transmission is an impressively strong, band free, 6 speed automatic transmission modeled after the renowned and respectable ZF 6HP26 six speed automatic transmission. The transmission has a respectable low 1st gear of 4.17:1 which also provides for increased towing performance and offroad capabilities.

What years did Ford use the 6R80 transmission?

The 6R debuted in 2005 in the 2006 model year Ford Explorer and Mercury Mountaineer. The 6R80 is featured in 2009 to present Ford F-150 pickups. It features torque converter lockup capabilities in all 6 gears and an integrated “Tow/Haul” mode for enhanced engine braking and towing performance.

Will a 6R80 bolt up to a 302?

Use this adapter to bolt your 6R80 Ford transmission to any engine block using the standard Small Block Ford bolt pattern. This kit works with pushrod 5.0 / 302″ and 5.8 / 351 Windsor engine blocks.

Will a 6R80 bolt to a 351w?

What is wrong with MT82 transmission?

MT82 transmission issues consist of high RPM lockout, slipping, jerking, premature wear, gear clashes, and failure. High RPM lockout is the biggest problem with this transmission. Even after replacing certain parts (like the shift fork or synchronizers) or the entire transmission, the problems can continue.

How long will a MT82 transmission last?

Large Member. I figure the clutch could last as long as 60K + if you aren’t driving hard and burning it up.

What happens if you mix Mercon V and Mercon LV?

Mercon V is the most common automatic transmission fluid for a ford model. On the other hand, Mercon LV is not compatible with any Mercon fluids. Even it doesn’t be mixed with Mercon V. Since Mercon LV is designed to meet the demands of most modern transmissions, it is compatible with older GM Dexron specifications.

What kind of transmission does a Ford 6R80 have?

FORD 6R80 I n this issue of GEARS, we’re going to delve into the Ford 6R80 transmission and discuss some of the more recent and major changes that have taken place. Ford began using the ZF6HP26 transmission in the 2005 Ford Expedition and Lincoln Navigator with the 5.4L engine.

Does the Ford 6R80 have a PCM?

As always, refer to the factory manual for wiring diagrams, as they may change from year to year and model to model. In addition to PCM control for the transmission, Ford also gave the 6R80 driver control. That’s right! Your 2011- on Ford with the 6R80 with a one-way clutch now has select-shift capability.

How do you lock the gears on a Ford 6R80?

In addition, you can lock out gears for driving in hilly conditions or when towing. By selecting M in first gear and pressing the – button, you can lock out the higher gears, essentially turning the 6R80 into a 5-speed, 4-speed, or even a 3-speed transmission.

What kind of conductor plate does a 6R80 have?

The 6R60/75/80 model conductor plate houses an internal TCM (figure 14). With the addition of the one-way clutch, the PCM has taken over control of transmission pressure, shifting, and braking, requiring a different conductor plate for the 6R80 with a one-way clutch (figure 15).

Posted in Advice