Menu Close

Is Cisco 2911 end of life?

Is Cisco 2911 end of life?

What is Cisco 2911 End of Life (EOL)? End of Life (EOL) means that the Cisco 2911 will no longer be sold, marketed, or updated it after the EOL date. Cisco continues to offer post-warranty support, but Third-Party Maintenance (TPM) is available for most OEM equipment that is EOL.

What is 2901 router?

Cisco 2901 router delivers highly secure data, voice, video, and application services for small offices. It offers embedded hardware encryption acceleration, voice-and video-capable digital signal processor (DSP) slots, optional firewall, intrusion prevention, call processing, voicemail, and application services.

What is Cisco 2900?

Cisco 2900 Series builds on the best-in-class offering of the existing Cisco 2800 Series Integrated Services Routers by offering four platforms (Figure 1): the Cisco 2901, 2911, 2921, and 2951 Integrated Services Routers.

What is Cisco voice bundle?

The Cisco 2900 series Integrated Services Routers offer embedded hardware encryption acceleration, voice- and video-capable digital signal processor (DSP) slots, intrusion prevention, call processing, voicemail, and application services. The Cisco 2901 Voice Bundle provides superior services integration and agility.

What is Router 2911?

The Cisco 2911 Integrated Services Router (ISR) delivers highly secure data, voice, video, and application service. Key features include: 3 integrated 10/100/1000 Ethernet ports (RJ-45 only) 1 service module slot. 4 enhanced high-speed WAN interface card slots.

How do I reset my Cisco 2901 router to factory settings?

Reset Router to Default Configuration

  1. With the router powered off, connect the power cord to your router, and plug the power cord into your power source.
  2. Find the Reset button on the router.
  3. Press and hold the Reset button while you power on the router.
  4. Release the Reset button after 10 seconds.

How do I setup my Cisco voice gateway router?

Complete these steps:

  1. On Cisco Unified Communications Manager Administration page, from the menu select Device > Gateway and click Add New.
  2. For gateway type, select H.
  3. On the Gateway Configuration page, use the following parameters:
  4. Click Save.
  5. Click Reset button, and another Reset button.

How much is a Cisco 2911 router?

CISCO2911/K9

Model: CISCO2911/K9 Cisco 2911 Router ISR G2
Replacement: ISR4331/K9
List Price: US$3,550.00
Price: USD AUD BRL GBP CAD CNY EUR HKD MXN RUB SGD CHF AED US$1,844.00
You save: US$1,706.00 (48% OFF)

How many Gigabit Ethernet ports does a Cisco 2911 router have?

1 x Cisco 2911 CISCO2911/K9 Integrated Services Router 2U 3x Gigabit Ethernet Ports.

What does WR erase do?

Log on to your switch, and enter the privileged EXEC mode by entering enable and then entering the enable password command. Enter write erase, which erases the NVRAM file system and removes all files.

What is the default IP address for Cisco router?

192.168.1.1
Most routers and switches by Cisco have default passwords of admin or cisco, and default IP addresses of 192.168. 1.1 or 192.168. 1.254. However, some differ as shown in the table below.

Posted in Interesting