Menu Close

What causes a P0500 code?

What causes a P0500 code?

Error Code P0500 is defined as Vehicle Speed Sensor Malfunction, indicating a malfunction in the vehicle speed sensor circuit, which is usually caused by a defective speed sensor or problems in the wiring harness.

How do I fix code P0500?

What repairs can fix the P0500 code?

  1. Vehicle speed sensor drive gear replaced.
  2. Repair or replacement of the wiring harness.
  3. Vehicle speed sensor replaced.
  4. Poor electrical connection resolved.

What is the VSS sensor?

The Vehicle Speed sensor or VSS measures transmission/transaxle output or wheel speed. The ECM uses this information to modify engine functions such as ignition timing, Air/Fuel ratio, transmission shift points, and to initiate diagnostic routines.

What controls speedometer?

Electronic speedometers use a vehicle speed sensor rather than a drive cable to compute the speed of the vehicle. The computer then uses these pulses to compute the speed of the vehicle, the distance the vehicle has traveled and how fast the engine is rotating.

What does P0500 mean?

Diagnostic trouble code (DTC) P0500 stands for “Vehicle Speed Sensor (VSS) Malfunction.” This code is set when the PCM or engine control module (ECM) detects incorrect speed readings or no signal at all from the vehicle speed sensor (VSS).

What is P0501 code?

What the P0501 code means. P0501 is an OBD-II generic code that the engine control module (ECM) got an input from the vehicle speed sensor (VSS) that is out of range or an erratic voltage output that is not stable or smooth, with movement up or down.

Can a speed sensor be cleaned?

The various components of the speed sensors can gather dirt from the road and from the dust that is generated by constant sharp braking. Speed sensors need to be cleaned on a regular basis to avoid damaging the anti-lock braking system.

What is a rev sensor?

November 5, 2013. Your vehicle’s engine speed sensor, or vehicle speed sensor as it is also known, sends information to your car’s computer about how fast the car’s engine is spinning at any particular moment. The sensor does this by recording how fast the crankshaft of your vehicle is spinning.

What is the p0500 code on a Dodge Durango?

P0500 is a OBDII trouble code that affects the Dodge Durango ‘s Vehicle Speed Sensor (VSS). The VSS sends a signal to the engine’s computer letting it know how fast that the vehicle is going.

How much does it cost to diagnose a p0500 Dodge?

The cost to diagnose the P0500 DODGE code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What does the VSS do on a Dodge Durango?

The VSS sends a signal to the engine’s computer letting it know how fast that the vehicle is going. The Durango uses this signal for many vehicle functions. It helps control transmission shifts, ABS, cruise control, the speedometer, and more.

Posted in Blog