Menu Close

What does clearing fault codes do?

What does clearing fault codes do?

Erasing error codes deletes the errors from the computer. In doing so, you lose the information that would help solve a problem with the car, so you shouldn’t erase them unless the problem has been corrected. Erasing them to pass a smog test generally won’t work.

How long do you have to drive to reset engine light?

30 to 100 miles
To make sure the check engine light does not reappear, it’s recommended that you drive your car 30 to 100 miles. This enables the vehicle’s “Drive Cycle” to reset, as the various sensors need time to recalibrate.

How do I clear my permanent DTC code?

The only way to clear a PDTC is to fix the underlying problem with the vehicle that originally caused the PDTC and its corresponding DTC to set, and then allow the vehicle sufficient drive time to re-run the monitor that identified the problem in the first place.

Does unhooking battery clear codes?

If you leave the battery disconnected for about 15 minutes, the vehicle systems will be completely reset when the battery is reconnected. It will clear the error codes and reset the check engine light if the battery is disconnected.

Can clearing codes cause problems?

When a DTC comes up on the scan, this means that there is an error or problem in the system. The DTC could be from the accident, from the repair process, or a previous issue altogether. Simply deleting these codes can leave the door open for problems further on.

Will check engine light come back on after reset?

When you reset your computer’s memory, the warning light will turn off. However, if there’s a problem, the light will come back on as soon as the computer runs the test that caused the light in the first place.

How long does it take for permanent DTC codes to erase?

The whole drive cycle must take at least 10 minutes. After performing a Universal Trip Drive Pattern, the computer clears the code, since it’s “seen” that the problem is fixed and not reoccurring.

What does a permanent DTC code mean?

Permanent Diagnostic Trouble Code
A Permanent Diagnostic Trouble Code (DTC) is stored when a DTC is confirmed and the Malfunction Indicator Lamp (MIL) has been illuminated. A Permanent DTC can only then be cleared by the module strategy and cannot be erased by clearing DTCs with a scan tool, a Keep-Alive Memory (KAM) reset, or battery disconnect.

What kind of antenna does a Chevy Silverado have?

Installing a shorty antenna chosen from AmericanTrucks’ selection of 2014-2017 antennas is an easy way to upgrade from the 31 inch long antenna that most Silverados are equipped with at the factory. These shorty antennas are designed to look good, with a sleek profile and either silver or black finish.

Who are the actors in Silverado?

Silverado: Directed by Lawrence Kasdan. With Kevin Kline, Scott Glenn, Kevin Costner, Danny Glover. A misfit bunch of friends comes together to right the injustices which exist in a small town. Menu

How good is the Great Silverado by Lawrence Kasdan?

8/10 Great Silverado is Lawrence Kasdan’s western, westerns were scarce in the 80’s, but went on to be a big hit at the box office. Kasdan, at this point was best known for screenwriting on blockbusters like The Empire Strikes Back and Return Of The Jedi.

Is ‘Silverado’ a good movie?

Although this is a movie that would be appropriate viewing for the whole family, Silverado is far from stupid and holds its own pretty easily against other classics of the genre. Overall, I think Silverado is a great movie and was done well.

Posted in Life