Menu Close

What is t 38 fax relay?

What is t 38 fax relay?

T.38 fax relay A calling fax machine places a PSTN call and is connected through a PSTN line to a gateway system. The emitting gateway demodulates the fax data and then relays the data to another receiving gateway (in packet form).

What is Cisco fax relay?

Cisco Fax Relay is a proprietary fax relay implementation that uses Real-time Transport Protocol (RTP) to transport fax data. It is the default fax relay type on Cisco voice gateways and the only supported fax option for Cisco Unified CME 4.0(3) and later versions.

What is fax passthrough?

Fax passthrough is the transportation of fax communications over an IP network using a low compression codec like G. Fax passthrough occurs using one of two methods on Cisco voice gateways, NSE-based passthrough or protocol-based pass-through.

Is T-38 a codec?

38. A Codec commonly used to transmit real-time fax data over Voice over Internet Protocol (VoIP) networks. Faxes can’t travel over a data network the same way they do across an analog connection.

Is T-38 a RTP?

The ITU standard for real-time facsimile over the IP network, T. 38, provides two UDP-based means for transporting its data: UDPTL and RTP. One benefit of using UDPTL is that it is more widely used for T. However, RTP provides additional features that may be beneficial in certain situations.

What is t30 fax?

30 Fax Overview. T. 30 is a fax handshake protocol that describes the overall procedure for establishing and managing communication between two fax devices.

What is a t38 gateway?

T. 38 is a protocol that describes how to send a fax over a computer data network. It is needed because fax data cannot be sent over a computer data network in the same way as voice communications. Most VoIP Gateways and ATA’s now support T. 38 reliably.

Do all fax machines support T-38?

The T. 38 protocol was designed to provide a raw data method to transmit FAX’s. In theory, this should work well because the data network is designed for the transmission of data where the voice network wasn’t. Since the vast majority of FAX machines in existence today do not have T.

Do all fax machines support T38?

What are T 30 protocols used in fax communication?

T. 30 is a fax handshake protocol that describes the overall procedure for establishing and managing communication between two fax devices. T….T. 30 Fax Overview

  • Setup the Call.
  • Select the Communication Mode.
  • Transmit the Message.
  • Post Message Processing (Including End-of-Message and Confirmation)
  • Release Call / Disconnect.

Posted in Life