Why does Verizon Network Extender need GPS?
The LTE Network Extender uses GPS service to obtain time and the device location information, which is used strictly for Emergency Services (911). It’s needed to validate that Verizon is licensed at the location and time synchronization in order for the device to function.
How do I fix my Verizon Network Extender?
The factory reset button is in a small hole located on the connection side of the network extender. Insert one end of an unfolded paperclip into the factory reset hole then press the paperclip on the button and hold for at least 30 seconds. The device must be connected to power for the reset to complete.
How do I know if my Verizon booster is working?
Call to confirm – Call #48 on your Verizon Wireless mobile phone and listen for this announcement: “You are under Network Extender coverage.” That announcement verifies that the Network Extender is functioning properly and you’re connected to it.
Why is network extender not working?
This kind of issue can occur if the extender does not have the latest firmware. Process: Make sure the extender is connected to the power adapter provided and into a live power outlet. Make sure the extender is within the Wi-Fi range of the wireless router and client device is connected to the extenders network.
How does the Verizon LTE extender work?
They work by pulling in weak signal from the nearest cell tower, amplifying it, and then rebroadcasting into your home or car. The end result: more bars, better signal, and faster internet. Carrier-specific boosters will support only ONE carrier at a time but are more powerful.
How do I reset my signal booster?
No matter which booster you have, rebooting is easy. Just pull the power plug. Wait 30 seconds, then plug it back in.
How do I test my Verizon extender?
Place your Verizon Wireless phone within 15 feet of the Network Extender for up to 3 minutes to register your phone. You can confirm you are connected to the Network Extender by dialing #48.
Do Wi-Fi extenders wear out?
They tend to last a long time and do not require much maintenance or repairs, but that doesn’t mean you can expect your Wi-Fi extender to last forever. Internal components will eventually wear out and stop working, and extenders become obsolete as new technologies emerge.
What is a femtocell device?
Femtocells, also known as ‘home base station’, are cellular network access points that connect standard mobile devices to a mobile operator’s network using residential DSL, optical fibres or cable broadband connections. Femtocell may be used with different existing wireless technologies.
Which Verizon 4G LTE femtocell is right for your office?
4G LTE Femtocell for offices and enterprises: Verizon 4G LTE Network Extender for Enterprise: The Verizon 4G LTE Network Extender for Enterprise supports 4G LTE only, for up to 64 simultaneous active users, and up to 300 idle users.
How do I troubleshoot error 6A-insufficient GPS signal?
GPS Insufficient Error 6A Please check user guide required GPS signal, please try to move your GPS antenna closer to the window, refer to2.1 Setup: Extender, 2.2 Setup: GPS & 5. Troubleshooting. If the issue persists, please call Customer Service (800-922-0204). 4G LTE Network Extender Verizon 4G LTE Network Extender User Guide Copyright © 2020
How to connect a femtocell to a router?
An ethernet backhaul will be required to connect the femtocell to your router. After the device has been installed, you will have to register the phone numbers of the subscribers (mobile phones) that will be connecting to it. Many devices can be registered, but only 4-8 handset devices will be able to use the femtocell simultaneously.
What if the LTE network extender won’t receive the GPS signal?
If the LTE Network Extender antenna can’t be placed near a window or has trouble receiving a GPS signal, refer your User Guide for instructions on installing the external GPS antenna cable. Can I mount the LTE Network Extender on the wall or ceiling?