Menu Close

How do I find RAID configuration on Dell R710?

How do I find RAID configuration on Dell R710?

On first boot, you use the PERC 5/I Configuration utility to configure the RAID controller:

  1. Select the controller, select Disk Group 0, then press F2.
  2. Select Add New VD.
  3. Select the RAID Level value, press Enter, select RAID 5 from the list, then press Enter again.
  4. Under Basic Settings, fill in the following fields:

How do you access the RAID controller on a Dell Poweredge?

When these systems are configured in UEFI BIOS mode, the RAID setup is accessed from the F12 pre-boot menu. Press F12 on power up while at the Dell logo splash screen. Then, select “Device Configuration” from the list shown in the F12 pre-boot menu.

How loud is a Dell Poweredge R710?

Hand down, though, the R710 has more capacity and produces way less noise than the 2950 but do be warned that if you get the ambient temperature of the system board up to 86-87 degF (30-31 degC) the fans will ramp up to about 8,000 RPM and it’s about as loud as a Dell 2950.

How do I clear RAID configuration?

How to delete RAID array with CTRL + i

  1. Turn on the computer.
  2. Use the up or down arrow keys to select “Delete RAID” Volume.
  3. Use the up or down arrow keys to select the RAID volume.
  4. Press Delete to delete the volume.
  5. Press Y to confirm the deletion.

What is UEFI RAID configuration?

The Unified Extensible Firmware Interface (UEFI) RAID configuration utility is a storage management application integrated into the system BIOS . It is used to configure and manage RAID disk groups, virtual disks, and physical disks. This utility is independent of the operating system.

Why servers are loud?

In the case of personal computers, workstations and servers, the noise usually emanates from the disk drive and the cooling fans. Usually, greater server computing power means higher power dissipation, calling for bigger/faster fans, which produce louder fan noise.

Can I change RAID configuration?

The RAID type of RAID Arrays in a RAID Group cannot be changed. The RAID Group feature is available on specific models only.

How to configure raid on a Dell personal computer?

Create an image of the hard drive containing the existing OS installation in a safe,accessible location (external hard drive,flash drive,hard drive not to be included in

  • Reboot and enable/install the RAID adapter.
  • Create your array.
  • Boot using your Windows Vista/7 installation disc,and select Repair your computer.
  • What controller to use in Dell R710?

    Dell R710 – What raid controller. Help. Hello, I finally decided between the HP DL380 G7 and Dell R710, chose R710 mostly because i want the 3.5″ LFF version with 6 Bays, 3.5″ are cheaper and i can also put 2.5 if i need with an adaptor, but i won’t, and i also chose Dell because the HP’s problem with temp detection on third party drives.

    How loud is the Dell R710?

    Dell R710 FAN always Loud. Hello all! I bought a used R710 yesterday. The Server is running great except the RAID Battery is dead. The Problem is, that the Server is very Loud, i can hear it from the basement to the top of the house. In ESXI 6.5 U2 the Sensors are displaying 8000-8400 RPM for the 5 Fans, the CPU Temp is at 50 Degree and all other temps seem to be good.

    Posted in Interesting