Menu Close

How much horsepower will Edelbrock heads add?

How much horsepower will Edelbrock heads add?

After installation of the Edelbrock Performer RPM Hemi heads, the peak numbers jumped to an impressive 508 hp and 469 lb-ft of torque. The Edelbrock heads were worth 49 hp and 28 lb-ft of torque, with gains increasing past the power peak.

Where are Edelbrock heads cast?

ALUMINUM CASTINGS Edelbrock’s permanent mold and sand cast aluminum parts take shape in two of the most modern high-tech foundries in the Western United States. The Edelbrock Foundries located in San Jacinto, California, prides itself on its quality and efficiency. The 185,000- sq/ft.

What is the head flow on Edelbrock performer?

Edelbrock Performer, Performer 5.0, Performer RPM 60cc exh. Notes: *Edelbrock offers the 2.02″ intake valve on all of the heads. However the intake runner volume however remains at 170cc regardless of the larger valve. Therefore flow gains on the intake side are minimal, Edelbrock data shows only 5 cfm gain at .

Where are Edelbrock heads made?

Edelbrock, LLC is an American manufacturer of specialty automotive and motorcycle parts. The company is headquartered in Olive Branch, Mississippi, with a Southern California R&D Tech Center located in Cerritos, CA. The Edelbrock Sand Cast and Permanent Mold Manufacturing foundries are located in San Jacinto, CA.

Are Edelbrock Performer RPM heads good?

Performer RPM Cylinder Heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These heads deliver great throttle response and power from 1,500 to 6,500 RPM. These heads feature the highest quality intake and exhaust valves and valve springs.

Does adding a cam increase horsepower?

Does a camshaft increase horsepower? Yes, a camshaft adds 10 to 20 horsepower depending on the setup. To get the full potential of the high-performance camshaft, you’ll have to swap out additional components like the air intake, exhaust manifold, injectors, and valve heads.

Are Edelbrock heads Made in USA?

Edelbrock E-Street Aluminum Cylinder Heads offer American-made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for entry-level street performance applications operating in the idle-to-5,500 rpm range.

What is going on with Edelbrock?

Edelbrock will be permanently closing its headquarters in Torrance, California, after being based in the state more than 80 years.

Posted in Blog