What is a 8BA Ford flathead?

What is a 8BA Ford flathead?

Starting life in 1932, the venerable Ford flathead V8 engine was refined and updated until its overhead valve successor filled its spot under the hoods of Ford passenger cars in 1954. The 8BA casting on this particular engine’s cylinder head means this engine is from Ford’s final run of flatheads from 1949 to 1953.

How do I know if I have a flathead V8?

How to Identify the Ford Flathead V8

1. Count the number of studs on the cylinder heads.
2. Locate the engine serial number.
3. Decode the engine serial number.
4. Measure the stroke.

What year is a 59AB flathead?

Heads marked “59-A” or “59AB” were used on all 90/100 hp (Ford & Mercury) engines from 1946 through 1948. The 59AB heads were sometimes used on earlier blocks in replacement rebuilds.

How much HP can you get out of a Ford flathead V8?

It was meant to be a carthorse, not a racehorse. Nevertheless, the flathead is the little engine that could. Despite having three rather than five main bearings, the flathead has stayed the course. With some exotic tuning, it has been known to produce 700 hp, and not just for short bursts.

Why is it called a flathead V8?

The first flathead V-8 displaced 3.6 liters and boasted a compression ratio of just 5.5:1. As you can see from Jason’s model, the flathead engine design features rather flat heads, which is how the mill earned its nickname. Each head is a single piece of metal that helped keep costs much lower.

Did Ford make a 292 engine?

For 1955, Ford increased the displacement and made engines at both 272 and 292 cubic inches. The 272 made 162 horsepower and 258 pound-feet of torque. All basic Ford products received this engine. The 292 engine gave Thunderbird and Mercury drivers 193 horsepower and 280 pound-feet.

How much does a Ford 8BA flathead engine cost?

Ford 8BA Flathead Engine, fresh rebuild, 239 C.U. – $5,000 (Red Bluff) Professionally rebuilt Ford Flathead V8, 1949 to 53, 8BA late model.

Where can I find a V8 Ford flathead rebuild?

Welcome to the web site of R & L Engines. The V-8 Flathead Ford rebuilding experts from mild to wild. R&L Engines expertise includes rebuilding all early Ford Flathead engines from Model A, B’s, T’s and V8 Ford Flatheads from 1932-36, LB’s, 59A’s, 8BA’s,V8 60’s, Ford and Mercury.

What kind of engine is a Ford flathead?

Jump to navigation Jump to search. The Ford flathead V8 (often called simply the Ford flathead, flathead Ford, or flatty when the context is implicit, such as in hot-rodding) is a V8 engine of the valve-in-block type designed by the Ford Motor Company and built by Ford and various licensees.

What are the main bearings on a Ford flathead V8 made of?

These shell main bearings are made of a cadmium silver alloy. The Ford flathead V8 has a single camshaft located inside the engine block above the crankshaft. It is spur gear driven; the camshaft’s spur gear is made of plastic.