Menu Close

What is ASTM A449?

What is ASTM A449?

ASTM A449 is a medium strength bolt manufactured from heat-treated medium carbon or alloy steel. ASTM A449 is identical to ASTM A325 and SAE J429 grade 5 in terms of strength and chemistry.

What is SAE J429?

SAE J429 standard covers specifications to chemical, mechanical and other material requirements for inch-series carbon and alloy steel bolts, screws, studs, and U-bolts, used in automotive and related industries in sizes up-to 1-1/2 inch, inclusive.

What is an A449 bolt?

ASTM A449 covers headed bolts, rods, and anchor bolts in diameters ranging from 1/4″ through 3″ inclusive. It is a medium strength bolt manufactured from a medium carbon or alloy steel that develops its mechanical values through a heat treating process. It is intended for general engineering applications.

How do you tell what grade a threaded rod is?

The bolts are color coded at the end that will project from the concrete to easily identify the grade used in the field (Grade 36: Blue, Grade 55: Yellow, Grade 105: Red). Permanent stamping with grade symbol and manufacturer’s identifier instead of color coding is a supplementary requirement.

What grade is an A325 bolt?

SAE grade 5
As a comparison, the ASTM A325 bolt is roughly equivalent to the SAE grade 5. A grade 8 bolt would be one that meets ASTM A490 standards. The A325 bolt strength, or SAE grade 5 bolt strength, is usually used for structural bolting projects.

Is A307 a Grade 5?

ASTM A307 Tap Bolt: To be used in drilled and tapped holes which are threaded full length. Used instead of a stud and a nut. Grade-5 Tap Bolt: Used to mount motors to machinery; also popular in automotive and truck repair.

What is ANV 35 92 used for?

V 35 92 (Acetaminophen and Hydrocodone Bitartrate 500 mg / 5 mg) It is supplied by Qualitest Pharmaceuticals Inc.. Acetaminophen/hydrocodone is used in the treatment of back pain; pain; rheumatoid arthritis; cough and belongs to the drug class narcotic analgesic combinations. Risk cannot be ruled out during pregnancy.

What is strength of materials?

Strength of materials, also know as mechanics of materials, is focused on analyzing stresses and deflections in materials under load. Knowledge of stresses and deflections allows for the safe design of structures that are capable of supporting their intended loads.

What is the relation between tensile strength and fatigue strength?

In addition, the fatigue strength is found to have linear relation with hardness or the sum of tensile and yield strengths only in lower strength range [2], [3], [4], [5]. In a word, there is also no suitable formula to satisfactorily describe the general relation between tensile and fatigue strengths of both high- and low-strength materials.

What is the difference between yield strength and factor of safety?

The yield strength of the material is commonly chosen as the strength limit to which the calculated stresses are compared. The factor of safety, FS, is calculated as: where σ actual is the calculated stress in the structure, and σ limit is a maximum stress limit, typically a material strength such as the yield strength ( S ty ).

Posted in Interesting