Menu Close

What MiraDRAIN 6000?

What MiraDRAIN 6000?

MiraDRAIN 6000 is a high-performance, high-strength drainage composite consisting of a three-dimensional, high impact polypropylene core, and a nonwoven filter fabric.

What does blind side waterproofing mean?

Blindside, or pre-applied, is a relatively new approach to. waterproofing that allows the membrane to be applied to. a backup wall, lagging, or even rock, and the concrete for. ADDITIONAL INFORMATION. the foundation walls poured against it.

What is fluid applied waterproofing?

Henry® 787 Elastomeric Fluid Applied Waterproofing Membrane is a single component, cold-applied, rubberized asphalt emulsion which cures to provide a heavy duty “seamless,” rubber-like membrane for use in waterproofing or damp proofing concrete or masonry surfaces above and below grade.

Is Henry waterproof?

Henry CM100 is a fast curing, one component elastomeric, solvent free, moisture cure waterproofing compound designed to provide a cold alternative to hot applied rubberized membrane systems or replace conventional hot mop felt ply and/or pre-formed sheeting systems.

How do you use MiraDRAIN?

Place CCW MiraDRAIN with the fabric side toward the soil. Attach adjacent panels together. Place the longitudinal edge of the core against the wall. Attach subsequent panels in shingle fashion and move up the wall.

Who makes MiraDRAIN?

MiraDRAIN System Brochure > Carlisle Coatings and Waterproofing.

What is negative side waterproofing?

Called negative-side waterproofing, this technique involves applying product to the dry or inside face of the surface. Negative side waterproofing prevents water from entering occupied space, but it does not prevent water from entering the substrate.

What is a blindside membrane?

Blindside, sometimes called pre-applied, is a term used to define the membrane type as well as the installation process. It reverses the typical application—the waterproofing is installed before the foundation is poured.

What are the types of waterproofing?

Different Types of Waterproofing Methods Popularly Used In Construction

  • Cementitious Waterproofing.
  • Liquid Waterproofing Membrane.
  • Bituminous Coating Waterproofing.
  • Bituminous Membrane Waterproofing.
  • Polyurethane Liquid Membrane Waterproofing.

What is elastomeric sheet?

Tremco Elastomeric Sheeting is designed to provide a durable, flexible, tear- resistant bridge in areas of high movement such as expansion joints, construction joints and flashing where a membrane waterproofing such as TREMproof® 6100, TREMproof 201/60 or TREMproof 250GC is being used.

How do I apply Henry 787?

Apply at a rate of 50 – 200 square feet per gallon depending on texture and porosity of surface. Ensure that surface is clean and in good repair. Surface must be free of dirt, residues, water-repellent compounds, and other foreign matter.

Is blueskin a vapor barrier?

Self-Adhesive Air and Vapor Barrier Membrane Impermeable to air, moisture vapor and water, Blueskin® SA is designed to install easily on a variety of prepared substrates.

Posted in Blog