Menu Close

Why does my Samsung DVD player keep turning on and off by itself?

Why does my Samsung DVD player keep turning on and off by itself?

Your home theater system has built in overheating protection. If it gets too hot, it will shut itself down to prevent itself from melting.

Why does my Samsung Blu-Ray player keep restarting?

Long story short, the latest version of that particular file is formatted correctly but Samsung’s firmware on its Blu-ray players may not have been coded properly to handle something as simple as a blank list. This causes the player’s main software to crash, which in turn makes the device reboot.

How do I troubleshoot my Samsung Blu-Ray player?

Samsung Blu-ray player is not responding

  1. Remove the disc. Press the eject button on the Blu-ray player to open the tray and remove the disc, and then press eject again to close the tray.
  2. Reset the player to factory settings.
  3. Perform a firmware update.

How do you reset a Samsung Blu-Ray player?

1 Power on your Blu-ray player if it’s not already on, tune your TV to the input where the Blu-ray player is connected. 2 With no disc in the player press and hold the Play/Pause button infront of the BD player for about 8 seconds or until “Resetting all settings to default values…” is displayed on your TV screen.

What does Prot mean on Samsung DVD player?

2.2k. Posted: Mar 16, 2014. darren, The prot means it goes into protection mode and shuts itself down to prevent any further damage. It is possible that your DVD player has detected a problem in the amplifier section and is shutting down to prevent further damage.

What is Prot in Samsung DVD player?

When you see “Protect” on the player’s LCD, the warning typically results from a speaker wiring problem, an electrical surge or an equipment defect. Inspect the system and its speakers to track down the problem.

Why did my Blu-ray player stop working?

There are several reasons a disc may not play in the Blu-ray player. A dirty or scratched disc is the most obvious cause, but an incorrect region code or configuration of your home theater system can be the reason as well. Whether you’re having trouble with 4K or 3D, Blu-ray or DVD, there is a fix.

Why do Blu-ray players stop working?

How can I update my Samsung Blu-ray player?

Software Update

  1. From the Home screen, navigate to and select Settings.
  2. The Settings menu screen appears. Select Support.
  3. Select Software Update.
  4. Select Update Now.
  5. The Blu-ray player will begin updating the software momentarily.
  6. You have completed the steps.

How do I reset my Samsung Blu-ray player BD j5700?


  1. Select Settings on the Home screen, and then press the Enter button.
  2. The Settings menu screen appears.
  3. Select Reset to restore all settings to factory defaults except network settings.
  4. Enter your security PIN to continue.
  5. Select Yes to restore all settings to factory defaults except network settings.

Why is my Blu ray player turning on and off?

The issue is that the touch screen panel has failed, and thus causes the Blu Ray Player to cycle on and off. (4) Remove front touch screen board by rotating the top out first, then you will see a thin brownish ribbon attached to the bottom;

Are Samsung Blu-ray players malfunctioning out of the Blue?

Samsung Blu-ray players are malfunctioning out of the blue, with most reports claiming that the devices are stuck in endless reboots. Thousands of owners of Samsung Blu-ray players and home theater systems have gone online to complain about the sudden issues, which seemingly started on June 19, according to ZDNet.

How do I Fix my Samsung TV that Won’t Play videos?

To fix the issue, Samsung eventually advised customers to return their inoperable video players for repairs. There is no software fix.

Does your Samsung Blu-ray player have a boot loop issue?

“We are aware of the boot loop issue that appeared on certain 2015 Samsung Blu-Ray players and are offering free mail-in repairs to customers who have been impacted,” a representative of the mega-manufacturer said in a Samsung forum post. It was speculated by netizens and some media reports that a HTTPS certificate error was to blame.

Posted in General