Menu Close

Why Ubuntu is not booting after installation?

Why Ubuntu is not booting after installation?

You’re not alone. This is one of the most common problems with Ubuntu not booting, usually occurring right after installation. This is because the Ubuntu boot disk (USB device or a DVD) is set as the boot device. To check the current boot device, boot into the system UEFI/BIOS, or boot order menu.

How do I boot into Ubuntu after installing Windows?

The graphical way

  1. Insert your Ubuntu CD, reboot your computer and set it to boot from CD in the BIOS and boot into a live session. You can also use a LiveUSB if you have created one in the past.
  2. Install and run Boot-Repair.
  3. Click “Recommended Repair”.
  4. Now reboot your system. The usual GRUB boot menu should appear.

Can Ubuntu be installed on Windows 7?

If you want to replace Windows 7 with Ubuntu, you will need to: Format your C:\ drive (with the Linux Ext4 filesystem) as part of the Ubuntu setup. This will delete all your data on that particular hard disk or partition, so you must have a data backup in place first. Install Ubuntu on the newly formatted partition.

How do you fix Windows boot after installing Linux?

  1. Enter Windows recovery mode by pressing “esc”(may be different way on your computer) while booting.
  2. Click on “Troubleshoot”
  3. Click “Advanced options”
  4. Choose “Command Prompt”
  5. Type the following commands: bootrec /fixmbr bootrec /fixboot bootrec /scanos bootrec /rebuildbcd.
  6. Now restart your computer.

How do I start Ubuntu from grub?

Use the arrow keys to select the “Ubuntu … (recovery mode)” option in the submenu and press Enter. GRUB will boot your Ubuntu system in a very minimal recovery mode menu, skipping the majority of the system services and all the graphical applications that load.

What is GRUB bootloader in Ubuntu?

GRUB 2 is the default boot loader and manager for Ubuntu since version 9.10 (Karmic Koala). As the computer starts, GRUB 2 either presents a menu and awaits user input or automatically transfers control to an operating system kernel. GRUB 2 is a descendant of GRUB (GRand Unified Bootloader).

How do I start Ubuntu after installing?

  1. OPTION 2: Download the Ubuntu After Install application directly (download link at bottom of page). Double click on the downloaded .
  2. Once installed search Ubuntu Dash for Ubuntu After install and start the application.
  3. Follow the on-screen instructions (see screenshots below)

How do I switch from Ubuntu to Windows 7?

open Ubuntu software center and install unetbootin. then use unetbootin to burn iso into pendrive ( this link explains how to burn iso in windows but same applies in ubuntu). then boot into pendrive by pressing F12(may be F8 or F2 in some) in most computers. Then click install windows.

Can Ubuntu boot but not Windows?

Boot in UEFI Mode. If you install Ubuntu in legacy mode, you won’t be able to boot to Windows 10 simply because you installed the two operating systems under two different modes. Make sure that both operating systems are installed in UEFI mode so that you can boot booth of them.

Can not install boot Repair?

Unable to install boot-repair

  1. Boot to LiveCD.
  2. Connect to Internet.
  3. Open terminal.
  4. Give command sudo add-apt-repository ppa:yannubuntu/boot-repair && sudo apt-get update.
  5. Then give command sudo apt-get install -y boot-repair && boot-repair.

How to fix Ubuntu Live USB not booting?

Create Your Live CD/USB. If you don’t already have one,create a live medium to work off of.

  • Add The PPA. It might seem counter-intuitive,but you can enable a PPA and install software on a live CD.
  • Install Boot-Repair. Now,you can install Boot-Repair like you normally would with Apt.
  • Run The Utility. Finally,you can run the utility.
  • How to solve no dual boot problem after installing Ubuntu?

    Start your system and when you see the GRUB menu (dual boot menu),use your arrow keys to highlight the operating system you want to use (Ubuntu in this case),…

  • Go down to the line starting with linux and add your parameter acpi=off at the end.
  • Now save and exit the file to reboot by pressing CTRL+X
  • What should I do after installing Ubuntu?

    update your software:

  • sudo apt update
  • sudo apt upgrade
  • sudo apt dist-upgrade
  • check for 3rd party drivers
  • enable software from ubuntu partners
  • install extras:
  • sudo apt install ubuntu-restricted-extras
  • enable the gufw firewall
  • adjust swap settings (if you are short on RAM) by editing/etc/sysctl.conf
  • How to repair Ubuntu easily?

    launch Boot-Repair from either : the Dash (the Ubuntu logo at the top-left of the screen) or by typing ‘boot-repair’ in a terminal Then click the “Recommended repair” button.

    Posted in Other