How do I fix Error 21 on my washing machine?
To reset your washer, you simply need to press “Pause/Cancel” to cancel the current wash cycle. If your washer still has water in the tub, press “Drain/Spin.” This will make your washer go into a secondary drain cycle to empty the water. You can then attempt to run your washer again and see if the error code is gone.
How do I reset the F21 code on my washing machine?
Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”
How do you reset the code on a Kenmore washing machine?
How to Reset a Kenmore Elite HE Washer
- Press the “Stop” button twice, and then press the “Power” button. Video of the Day.
- Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
- Press the “Start” button to complete the reset process and restart the washing machine.
Where is the drain pump located on a Kenmore front load washer?
The drain pump is located in the lower front corner of most Kenmore front-loading machines, and the most difficult part of the job may be getting to it. If the machine doesn’t have an access panel, as some do, you’ll have to take the entire front panel off.
How do I fix error code F21 on Kenmore?
This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.
What does F21 error code mean?
The Whirlpool washer error code F21 means the washing machine has a “water draining issue”, meaning the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out. In other words, the washer is taking too long to drain the water out of the tub.
How do you reset a Kenmore front loader?
To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.
How do I reset a front load washer?
What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.
What does E21 mean on a Kenwood washing machine?
Kenwood washing machine E21 When your washing machine has detected a water drainage problem during the cycle this could be due to a blocked or defective drain pump, an obstructed drain hose, or issues with the PCB.
What does F28 mean on Whirlpool washer?
An F28 error code is a common problem that means there is a communication problem with the central control unit. This problem is generally solved by essentially rebooting the control unit. Rebooting the control unit is accomplished in less than 10 minutes, even by the novice.
What does error code F21 mean?
– Plug the washer into a wall outlet. – Press the button that says Pause/Cancel twice. – Now hold the button for a few seconds, until the display is blank. – If the F21 error continues to flash on your display, switch the washer off and unplug it. – Then plug it back in and switch it on. – See whether the issue has been fixed.
What does F21 mean on my washer?
Whirlpool washer error code F21 means that the washing machine has a “water drainage problem”, which means that the drain pump itself is there, or the drain hose is closed and the washer is having trouble getting water out. In other words, the washer is taking too long to drain water from the tub.
How do you fix a Kenmore washer?
Drain Pump. The drain pump can begin leaking water if it’s damaged,cracked or some of the hoses connected to get loose.
What does F21 mean on Bosch washing machine?
What does flashing key mean on Bosch washing machine? If your Bosch washing machine has an advanced touch screen display, there should be an illuminated square button with a key symbol and “3 sec” underneath it.